Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.

Do not undervalue the forklift at work. If the operation is not good, there will be serious crashes in mins, and there are several mishaps involving forklifts.

Instance 1: The forklift freight obstructed the motorist's view, and the person in front could not be discovered, leading to a moving mishap.
Case 2: In order to preserve the balance of the forklift when raising heavy items, the workers utilized their body weight as the weight, which practically created casualties.
Instance 3: The size of the forklift cargo exceeds the allowable size of the course and hangs on the roadside rack, which almost triggers an mishap.
Situation 4: Forklift is speeding and surrender during a turn.
Instance 5: The forklift chauffeur did not discover the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift raises the employees unlawfully, the forklift motorist does not use the seat belt, the forklift lifter drops and the motorist is crushed when the forklift rolls over.
Instance 7: The forklift motorist did not put on a seat belt and fell from the lorry when it rolled over and was crushed.
Forklift operation should focus on these matters ：.

Begin.
1. Prior to starting, observe the environments, and after validating that there are no barriers that prevent the safety and security of driving, honk the horn initially and after that start.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale have to be secure before starting.
3. When the forklift starts with a tons, the vehicle driver must initially verify that the load is secure and trusted.
4. The begin has to be sluggish and constant.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast ought to be slanted backward. .
2. Do not raise the fork expensive when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles in the sky. When the lots is traveling, the fork should not be elevated too high, which will impact the security of the forklift. .
3. After unloading, the fork ought to be decreased to the normal driving position before driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal must be released initially. High-speed sharp turns are restricted. High-speed doglegs will certainly trigger the automobile to shed side stability and tip over. .
5. When the forklift is downhill, it is purely forbidden to turn off the fire and slide, and it is forbidden to brake suddenly while driving with lots unless there are special situations.
6. When the forklift is running, it should obey the web traffic rules in the factory and should maintain a specific safety distance from the automobile in front. .
7. When the forklift is running, the tons must be in the most affordable setting that does not prevent the driving, and the gantry needs to be properly tilted back. The lots will not be raised other than when piling or filling. .
8. The elevation of the tons need to not obstruct the vehicle driver's view. In special circumstances, when the thing influences the forward vision, drive at a low speed when turning around.
9. It is prohibited to activate the ramp, nor to drive across the ramp. .
10. The safe driving speed of the forklift in the manufacturing facility area is 5 km/h, and it should drive safely at a reduced rate when going into the production workshop location. .
11. When the forklift is lifted, lifted or driven, it is prohibited for employees to base on the fork to hold items and play a stabilizing role. .
12. If troubles are discovered, they will certainly be repaired and reported in a timely manner, and they will never ever run with diseases or conceal them.

filling and unloading.
1. When fork-loading products, the range in between both forks ought to be changed as needed to make the lots of both forks balanced and not skewed, and one side of the thing ought to be against the rack. .
2. It is forbidden to collaborate with a solitary fork or utilize a fork top or pull. In unique scenarios, safety and security indication should be set up to advise bordering pedestrians. .
3. In the process of loading and dumping products, the forklift must be stopped with the brake. .
4. The rate of the automobile ought to be sluggish and steady. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as feasible under the load, and it ought to be noted that the fork idea must not touch other products or objects. The load must be maintained with marginal back tilt of the gantry to make sure that the load does not glide backwards. The mast can be slanted onward slightly when the load is reduced to allow for very easy positioning of the load and removal of the forks. .
6. It is forbidden to fork items at high speed and ram tough items with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so as to avoid the collapse of the goods and hurt individuals. .
8. Overwhelming is prohibited, and it is restricted to make use of forks to raise personnel to engage in high-altitude operations to stay clear of high-altitude dropping accidents. .
9. It is not permitted to use the brake inertia to slip, put, round or roll objects. .
10. It is not enabled to utilize forks to choose, transform pallet unload.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you must unload the goods or lower the fork frame.
2. Pull the emergency brake manage to dead or dispirit the emergency brake button.
3. The engine is switched off and the power is cut off. (Except for unique conditions, such as the vehicle driver does not leave the lorry's line of vision and does not exceed 1 min).
4. Remove the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance needs to be examined, and gas, lubricating oil and cooling water need to be included.
2. Check the safety efficiency of starting, running and braking.
3. Examine whether the lights and horn signals are complete and reliable.
4. During the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the outside leakage needs to also be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You must inspect before leaving the auto;.
2. When you experience someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The turning should not be too sharp to avoid the tendency of " cost-free turning";.
6. Running up and down the incline must be slow-moving and uniform, and no switching on the slope is enabled.
7. Do not drive across the slope. When the gradient is greater than 10%, the car must be driven in reverse when declining;.
8. When the forklift employees carry the goods and move on, if they come across large or heavy goods and go to the driver's view, they ought to take the turning around workout
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is not enabled.
2. It is not enabled to raise the goods for long distance driving.
3. It is not allowed to pick up the goods by passing on the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to make use of inertia force Electric Forklift Truck for Warehouse to get the goods.
6. It is not allowed to utilize braking pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring individuals to work with the pallet or fork, and it is purely restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car park is not permitted under the list below conditions.
1. Contours, slim roads, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an challenge on one side of the road, the contrary side of the section with the same size as the obstacle need to be within 20 Stand-on Electric Pallet Stacker meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844